Specifications
General
| Frequency range | TX | 156.025 ~ 157.425 MHz | |
|---|---|---|---|
| RX | 156.050 ~ 163.275 MHz | ||
| DSC | 156.525 MHz | ||
| AIS1, 2*1 | 161.975, 162.025 MHz | ||
| Usable channels | USA, CAN, INT, WX channels | ||
| Type of emission | 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*1 | ||
| Power supply requirement | 13.8 V DC (11.7 ~ 15.9 V DC) | ||
| Current drain (at 13.8 V DC) |
TX 25 W output | 5.0 A | |
| RX Max. audio | 1.6 A 2.0 A (with HM-195) 4.0 A (with extSP) 7.3 A (with ext SP, RX hailer, and HM-195) |
||
| Operating temperature range | –20°C ~ +60°C, –4°F ~ +140°F | ||
| Antenna impedance | 50 Ω | ||
| Dimensions (W x X x D) | 175 x 110 x 53 mm, 6.8 x 4.3 x 2.1 in | ||
| Weight (approx.) | 730 g, 1.6 lb (not including microphone) | ||
Transmitter
| Output power (at 13.8 V DC) | 25 W, 1W | |
|---|---|---|
| Max. frequency deviation | ±5 kHz | |
| Frequency tolerance | ±0.5 kHz | |
| Spurious emissions | Less than −70 dBc (at 25 W) | |
| Residual modulation | More than 40 dB | |
| Adjacent channel power | More than 70 dB | |
Receiver
| Sensitivity (at 12 dB SINAD) DSC (1% BER) |
–10 dBμ typical –1 dBμ emf typical |
|
|---|---|---|
| Adjacent channel selectivity DSC (1% BER) |
More than 75 dB More than 73 dBμ emf |
|
| Spurious response DSC (1% BER) |
More than 75 dB More than 73 dBμ emf |
|
| Intermodulation DSC (1% BER) |
More than 75 dB More than 68 dBμ emf |
|
| Hum and noise | More than 40 dB | |
| Audio output power (at 10% distortion with 4 Ω) |
More than 15 W (external speaker) 20 W typical (RX Hailer) 25 W typical (Hailer) |
|
Wireless LAN
| Wireless LAN standard | IEEE802.11 b/g/n |
|---|---|
| Authentication and Encryption | WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES) |
| Channels | 1 to 13 (2.4 GHz band)*2 |
| Output power | Less than 10 mW/MHz |
*1 Only for the Integrated AIS version. *2 May differ depending on the country of use.
Measurements made in accordance with TIA/EIA 603.
All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard |
MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure |
500.5 |
I, II |
| High Temperature |
501.5 |
I, II |
| Low Temperature |
502.5 |
I, II |
| Temperature Shock |
503.5 |
I-C |
| Solar Radiation |
505.5 |
I |
| Rain |
506.5 |
I |
| Humidity |
507.5 |
II |
| Salt Fog |
509.5 |
- |
| Dust Blowing |
510.5 |
I |
| Immersion |
512.5 |
I |
| Vibration |
514.6 |
I |
| Shock |
516.6 |
I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
Applicable IP Rating
| Ingress Protection Standard | |
|---|---|
| Dust & Water | IP68 Dust-tight and waterproof protection |
Reviews
There are no reviews yet.