ICOM IC-V86

VHF/UHF TRANSCEIVERS
IC-V86 - VHF
IC-U86 - UHF
7 W Output Power and 1500 mW Audio

General Details

VHF/UHF TRANSCEIVERS

IC-V86
IC-U86
7 W Output Power and 1500 mW Audio

Features


7 W Output Power and 1500 mW Audio

* Wide open space. Approximate, comparing the IC-V86 with the IC-V80. Communication range may differ depending on operating environment or weather conditions, etc. 7 W output power is only for theIC-V86.

1500 mW Powerful Audio and 1.5 Times* Higher Sound Pressure
* Approximate, comparing the IC-V86 with the IC-V80.

Dust-Protection, Water Resistance and a Tough Body
(IP54 and MIL-STD 810G)

19 hours* of Long Lasting Battery Life

EX Hi power with BP-298.
TX : RX : standby = 5 : 5 : 90 (3 sec. : 3 sec. : 54 sec. )
(The Power Save function is set to “P–S.16”)
No PC Programming Necessary, Settings Changeable from the Radio*

PC programming is also available.

Durable BNC Type Antenna Connector

Made in Japan Quality and Reliability

Other Features

Audio volume/VFO mode/Memory channel mode can be changed with the rotary knob
Supplied BC-240, battery charger with a charging control function that prolongs the life of the battery
Integrated VOX function
200 memory channels, 1 Call channel and 6 scan edges
Built-in CTCSS and DTCS encoder/decoder
Priority, program, memory, skip and tone scanning

Specifications

General

 

IC-V86

IC-U86

Frequency range
(TX/RX guaranteed range)

TX: 144–148 MHz
RX: 136–174 MHz

TX: 430–450 MHz
RX: 400–472 MHz

Type of emissions

F2D, F3E (FM, FM-N)

Number of channels

207 channels (200 memory channels, 1 call channel and 6 scan edges)

Antenna impedance

50Ω

Power supply requirement

7.5V DC

Operating temperature range

–20 ˚C to +60 ˚C, –4 °F to +140 °F

Frequency stability

±2.5ppm (–20 ˚C to +60 ˚C, –4 °F to +140 °F)

Current drain TX
(EX Hi/Hi/Mid/Low)
1.6/1.4/1.0/0.5 A typical EXP1: 1.6/1.5/1.0/0.5 A typ.
EXP2: 1.6/1.4/0.9/0.5 A typ.
RX
(Max. audio)

450 mA typ. (INT SP),
200 mA typ. (EXT SP)

450 mA typ. (INT SP),
200 mA typ. (EXT SP)

Dimensions (W×H×D)
(Projections not included)

58.6 × 112 × 30.5 mm,
2.3 × 4.4 × 1.2 in
(with BP-298)

Weight (Approximate)

300 g, 10.6 oz
(with BP-298, FA-B57V)

290 g, 10.2 oz
(with BP-298, FA-B57U)

Transmitter

 

IC-V86

IC-U86

Output power
(EX Hi/Hi/Mid/Low)

7.0/5.5/2.5/0.5 W

5.5/4/2/0.5 W

Maximum frequency deviation

±5.0 kHz/±2.5 kHz (Wide/Narrow)

Spurious emissions

Less than –60 dB

External microphone connector

3-conductor 2.5 (d) mm (1/10″)/2.2 kΩ

Receiver

 

IC-V86

IC-U86

Sensitivity

–124 dBm typical

EXP1: –121 dBm typical
EXP2: –123 dBm typical

Squelch sensitivity

–126 dBm typical

EXP1: –123 dBm typical
EXP2: –125 dBm typical

Selectivity (Wide/Narrow)

75 dB typical/
70 dB typical

70 dB typical/
68 dB typical

Intermodulation

65 dB typical

Audio output power Internal SP

1500 mW typical (with 8 Ω load)

External SP

550 mW typical (with 8 Ω load)

External speaker connector

3-conductor 3.5(d)mm (1/8″)/8Ω

Applicable U.S. Military Specifications

Standard
MIL-810 G
Method
Procedure
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5 II
Salt Fog 509.5
Dust Blowing 510.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Applicable IP Rating

Ingress Protection Standard
Dust and Water IP54 (Dust-protection, water resistance)

 

All stated specifications are subject to change without notice or obligation